Products

Type D Class I & II Temporary Tape

Advance Traffic Marking’s line of removable tapes work together to safely and economically direct traffic around construction work zones. With fast application marked roadways can be immediately opened to traffic, limiting road closures. The pressure sensitive adhesive backing conforms to all asphalt and concrete surfaces providing a secure bond through heavy traffic and extreme hot or cold temperatures. Tape can be removed manually in large pieces without the use of heat or special equipment, leaving the road surface undamaged.

• 4″, 6″, 8″, 12″, & 24″ Widths
• 90′, 180′, 360′, & 500′ Lengths
• White & Yellow
• Arrows & Text available

Type E “Black-out” Temporary Tape

Advance Traffic Marking’s line of removable tapes work together to safely and economically direct traffic around construction work zones. With fast application marked roadways can be immediately opened to traffic, limiting road closures. The pressure sensitive adhesive backing conforms to all asphalt and concrete surfaces providing a secure bond through heavy traffic and extreme hot or cold temperatures. Tape can be removed manually in large pieces without the use of heat or special equipment, leaving the road surface undamaged.

• 6″ Width
• 90′, 180′, & 360″ Lengths

Removable Primer

ATM Removable Primer should be used under the following marginal conditions:

1. When air or surface temperatures are expected to fall below 40°F (5°C) within 24 hours of installtion.
2. If rain is expected within 24 hours after installation, ATM does not recommend installation, and doing so will void the warranty. ATM also understands certain situations require installation outside of our recommendations. In such cases, ATM primer should always be used. See attached “Road Surface Guide”.

Concrete Barrier Reflectors

PCBM portable concrete barrier markers are made of
high-impact thermoplastics for long, maintenance-free life in
the field. A variety of styles meet all your needs from high target
value to impact resistance. We can manufacture reflectors
using any grade or color of reflective sheeting in order to meet
your local requirements.
Typical applications of PCBMs include:
• Delineation of temporary concrete barrier walls
• Delineation of permanent concrete barrier walls
• Delineation of concrete bridge parapets
• Delineation on top of wooden guardrail posts

**SEE PRODUCT DETAILS BELOW FOR ADDITIONAL SHAPES AND SIZES**

Guardrail Reflectors

Illuminate invisible guardrails at night with bright reflective
markers that provide clear delineation. Pexco’s guardrail
markers are manufactured with engineering resins and are
designed to endure the rigors of construction work zones and
permanent installations. We can manufacture reflectors using
any grade or color of reflective sheeting in order to meet your
local requirements.
Typical Applications include:
• W-beam guardrails • Wood and steel guardrail posts
• Bridge approaches • Hills, curves, gores, off-ramps

**SEE PRODUCT DETAILS BELOW FOR ADDITIONAL SHAPES AND SIZES**

Work Zone Pavement Markers

RPMs and Halftracks
Effective and convenient long-term temporary road markers
are designed to be long lasting enough for use on both
low volume roads and interstate highways to provide clear
guidance to motorists both night and day. Simple to install
and remove.
• Two standard colors – white and yellow
• Reflective tape can be applied on one or both sides
• Optional factory-applied high-tack butyl adhesive pad
allows for a peel and stick application to the roadway

TOM – Temporary Overlay Markers
Primarily for short-term temporary lane line markings in
asphalt paving projects and other construction work zones,
these markers are placed after final rolling of the new
asphalt. TOMs are engineered for easy application and
removal to reduce the amount of time workers are in the
roadway.
• Standard colors are yellow and white; additional colors by
special order
• Factory-applied butyl pad keeps TOMs in place and are
easily removed with a simple tug
• Available with bright and tough cube corner, microprismatic
sheeting on one or both sides

TRPM – Flexible Chip Seal Markers
Easy “Stick and Stomp” TRPMs come with one clear plastic
cover or cap which is designed to protect the marker and
reflective sheeting from asphalts or slurry products.
• Factory-applied butyl pad for “Stick and
Stomp” installation
• Standard colors are yellow and white
• Additional colors, high heat TRPMs for
extreme temperatures, and multiple
cover and staple configurations are
available
• Available with bright and tough
cube corner, micro-prismatic
sheeting on one or both sides

**SEE PRODUCT DETAILS BELOW FOR ADDITIONAL INFO**